Posted by Gaden 208.236.224.44 using Mozilla/4.0 (compatible; MSIE 4.01; Windows 98) on April 05, 2000 at 17:15:06:
In Reply to: Indeed...Sometimes a few of us are on the board atthe same time...(read Chris) posted by Martin on April 05, 2000 at 15:07:32:
For some reason, my comp freezes during the delay command then resumes when the tiles change. I'm using 400mhz AMD-K62...so...I got the PC power to multitask...but...the simple program seems to really slow it down. I think this is due to the delay command...I'm not sure though... any reason it would do this ?
Here is the program
:animat
#Put(7,4,"disco1b.gph")
#Put(9,4,"disco3.gph")
#Delay(1)
#Put(8,4,"disco2b.gph")
#Put(7,4,"disco1.gph")
#Delay(1)
#Put(9,4,"disco3b.gph")
#Put(8,4,"disco2.gph")
#Delay(1)
#Branch(:animat)
This is just for the sign outside ;)